Industrial Wired Black / Orange Seat Belts

The Industrial Wired Forklift Seat Belts from Davis Access Parts provide a robust operator-restraint solution for forklifts, fork trucks, material handling equipment, telehandlers and construction plant machinery requiring an electrical seat-belt buckle connection.

Available with either black or high-visibility orange webbing, these industrial seat belts combine a traditional operator restraint with an integrated wired buckle contact. This allows the seat belt to be incorporated into compatible machine warning, monitoring or interlock systems where the equipment is designed to recognise whether the buckle is connected.

The range includes:

• DAP-BSB-Wired – Black Wired Seat Belt
• DAP-OSB-Wired – Orange Wired Seat Belt

Both versions feature an ALR Automatic Locking Retractor, 47mm-wide webbing, a push-release top-release buckle and a change-over electrical buckle contact with two connections and 320mm of wiring.

This makes these Wired Forklift Seat Belts particularly suitable for equipment where the seat-belt restraint needs to provide an electrical signal to a compatible machine system.

Designed for demanding industrial applications, these seat belts are suitable for consideration across forklift fleets, material handling equipment, telehandlers and construction plant machinery, subject to confirming the machine’s mounting dimensions and electrical requirements before installation.

Wired Forklift Seat Belt for Fork Trucks & Material Handling Equipment

Forklifts operate in demanding environments including warehouses, distribution centres, manufacturing facilities, loading areas and industrial yards.

A correctly fitted Forklift Seat Belt forms an important part of the machine’s operator-restraint system.

On machines equipped with electrical seat-belt monitoring, the restraint may also need to communicate with the machine’s electrical system.

The Davis Access Parts Wired Forklift Seat Belt provides both mechanical restraint and an electrical buckle contact within the same assembly.

Potential applications include:

• Counterbalance forklifts
• Fork trucks
• Reach trucks
• Side loaders
• Warehouse trucks
• Material handling equipment
• Telehandlers
• Specialist industrial machinery
• Construction plant equipment

The integrated wiring makes these belts particularly useful when replacing an existing wired seat belt or when a compatible machine requires buckle-status monitoring.

Forklift Seat Belt with Electrical Buckle Switch

One of the most important features of the DAP-BSB-Wired and DAP-OSB-Wired is the electrical contact incorporated into the buckle.

Unlike a standard non-wired forklift seat belt, these versions contain a change-over buckle contact.

The product specification includes:

• Change-over buckle contact
• Two electrical connections
• 320mm wiring length
• Wired buckle connection

This electrical connection can be incorporated into compatible machine systems designed to monitor the condition of the seat-belt buckle.

Depending on the individual machine design, a wired seat-belt signal may form part of:

• Seat-belt warning systems
• Operator monitoring systems
• Audible warning systems
• Visual warning systems
• Machine interlocks
• Operator-presence systems
• Fleet safety systems

The exact function will depend on the individual machine and its electrical control system.

Always confirm compatibility before connecting the seat belt to a machine’s electrical system.

Black Wired Forklift Seat Belt – DAP-BSB-Wired

The DAP-BSB-Wired Black Forklift Seat Belt provides a traditional industrial appearance combined with an integrated electrical buckle connection.

Black seat-belt webbing provides a discreet OEM-style appearance that works well with most industrial seating.

The DAP-BSB-Wired is suitable for consideration across:

• Forklifts
• Fork trucks
• Material handling equipment
• Telehandlers
• Plant machinery
• Construction equipment
• Industrial machinery

The black belt provides the same mechanical and electrical specification as the orange version, allowing fleet operators to select the colour most appropriate for their equipment.

Orange Wired Forklift Seat Belt – DAP-OSB-Wired

The DAP-OSB-Wired Orange Forklift Seat Belt combines the wired buckle system with highly visible orange webbing.

The bright webbing makes the belt easier to identify visually compared with a traditional black restraint.

This can be particularly useful for:

• Forklift fleets
• Warehouse operations
• Construction sites
• Material handling fleets
• Telehandlers
• Plant equipment
• Hire fleets
• Industrial machinery

The high-visibility orange webbing can also make it easier for the operator to locate the belt when entering the machine.

For fleet managers and site supervisors, the orange colour may provide improved visual identification of the restraint during routine equipment observations.

High-Visibility Orange Forklift Seat Belt

For businesses looking specifically for a High-Visibility Forklift Seat Belt, the DAP-OSB-Wired provides an excellent alternative to conventional black webbing.

High-visibility orange can make the restraint more noticeable from outside the operator’s seating position.

Potential advantages include:

• Increased belt visibility
• Easier visual identification
• Easier for the operator to locate
• Distinctive industrial appearance
• Useful across large forklift fleets
• Suitable for plant and construction equipment

The orange webbing does not change the fundamental specification of the seat belt; it simply provides a more visually distinctive alternative to black.

ALR Automatic Locking Retractor

Both wired seat-belt versions feature an ALR – Automatic Locking Retractor.

The retractor is contained within a closed housing and uses a side-mounted configuration.

The retractor measures approximately:

• 130mm long
• 90mm wide
• 50mm high

The retractor mounting hole is approximately 12mm diameter.

The retractable arrangement helps keep the webbing stored neatly when it is not being used.

Benefits include:

• Reduced loose webbing
• Neater installation
• Convenient everyday operation
• Compact storage
• Professional industrial appearance
• Suitable for repeated fleet use

The ALR retractor makes the seat belt particularly suitable for industrial equipment where the restraint may be used repeatedly throughout each working shift.

Push-Release Top-Release Buckle

The Wired Forklift Seat Belt uses a push-release buckle with a top-release system.

The buckle is designed around a seat-mounted Type A1 configuration.

The buckle specification includes:

• Push-release buckle
• Top-release system
• Seat-mounted Type A1 configuration
• 160mm buckle length
• 14mm mounting hole
• Integrated electrical contact
• No buckle tensioner

The familiar push-button design provides straightforward operation for forklift and plant-equipment operators.

47mm Industrial Seat Belt Webbing

Both the black and orange versions use 47mm-wide industrial seat-belt webbing.

The substantial webbing width provides a robust restraint suitable for demanding industrial applications.

Customers can choose between:

Black Webbing

Provides a conventional, understated OEM-style appearance.

Orange Webbing

Provides increased visual identification and a distinctive high-visibility appearance.

This gives businesses the option to select the seat-belt colour best suited to their fleet or workplace requirements.

Technical Information

Product: Industrial Wired Seat Belt

Applications: Forklifts, Fork Trucks, Material Handling Equipment, Telehandlers & Construction Plant

Black Version: DAP-BSB-Wired

Orange Version: DAP-OSB-Wired

Retractor Type: ALR – Automatic Locking Retractor

Retractor Housing: Closed

Retractor Mounting: Side-Mounted – Retractor A

Retractor Height: 50mm

Retractor Length: 130mm

Retractor Width: 90mm

Retractor Mounting Hole: 12mm Diameter

Seat Belt Width: 47mm

Tongue Type: Type A Tongue

Tongue Outside Length: 31mm

Tongue Outside Width: 22mm

Tongue Thickness: 3mm

Tongue Inside Length: 20mm

Tongue Inside Width: 11.4mm

Buckle Type: Push Release

Buckle Release System: Top Release

Buckle Mounting: Seat Mounted – Type A1

Buckle Length: 160mm

Buckle Mounting Hole: 14mm Diameter

Buckle Electrical Contact: Change Over

Number of Electrical Connections: 2

Wiring Length: 320mm

Buckle Contact Connection: Wired

Buckle Tensioner: No

Weight: 0.70kg

320mm Wiring with Two Electrical Connections

The DAP-BSB-Wired and DAP-OSB-Wired include 320mm of wiring from the buckle contact.

The system incorporates two electrical connections, allowing the buckle contact to interface with a compatible machine electrical system.

This feature separates these products from the non-wired Davis Access Parts seat-belt versions.

It is particularly important when replacing a seat belt on equipment where the original restraint is connected electrically to the machine.

Before installation, always check:

• Machine wiring requirements
• Connector type
• Electrical configuration
• Buckle-switch requirements
• Mounting dimensions
• Original seat-belt specification
• Machine manufacturer’s requirements

A wired seat belt should not automatically be assumed to be electrically compatible simply because its physical mounting dimensions are suitable.

Wired vs Non-Wired Forklift Seat Belts

Choosing between a Wired Forklift Seat Belt and a non-wired seat belt depends on the machine’s original configuration and safety system.

Wired Forklift Seat Belt

A wired seat belt incorporates an electrical contact within the buckle.

The DAP-BSB-Wired and DAP-OSB-Wired have:

• Change-over buckle contact
• Two electrical connections
• 320mm wiring

This allows the buckle condition to be detected by a compatible electrical system.

Non-Wired Forklift Seat Belt

A non-wired seat belt provides the mechanical restraint without an electrical buckle contact.

This type may be suitable for older or simpler equipment where seat-belt monitoring is not required.

If the existing machine uses a wired buckle, replacing it with another correctly specified wired restraint will normally be the appropriate route, subject to confirming compatibility.

Forklift Seat Belt Warning & Monitoring Systems

Modern forklifts increasingly incorporate operator-safety monitoring systems.

Depending on the equipment design, the machine may monitor:

• Operator seat occupancy
• Seat-belt buckle status
• Parking brake status
• Direction selection
• Operator-presence controls
• Machine movement

A compatible Forklift Seat Belt with Switch can provide the buckle-status signal required by some of these systems.

The exact behaviour of the machine is determined by its original control system.

For example, depending on the equipment manufacturer and model, an unfastened seat belt could potentially trigger a warning or form part of an interlock sequence.

The DAP-BSB-Wired and DAP-OSB-Wired provide the electrical buckle contact required for compatible installations, but the belt itself does not determine how the machine responds to that signal.

Replacement Fork Truck Seat Belt

Forklift seat belts are exposed to frequent use and should be inspected as part of routine machine maintenance.

A Fork Truck Seat Belt may require replacement due to:

• Damaged webbing
• Fraying
• Cuts or abrasion
• Faulty buckle
• Damaged retractor
• Electrical buckle-contact failure
• Damaged wiring
• Missing restraint
• Seat replacement
• Fleet refurbishment
• General wear

A damaged or incorrectly operating operator restraint should be investigated and replaced where necessary in accordance with the equipment manufacturer’s requirements.

The DAP-BSB-Wired and DAP-OSB-Wired provide replacement options where both a mechanical restraint and wired buckle contact are required.

Wired Forklift Seat Belts for Leading Manufacturers

Subject to confirming physical and electrical compatibility, the Davis Access Parts Wired Forklift Seat Belt may be suitable for equipment from many leading material handling manufacturers.

Potential applications may include:

• Caterpillar Lift Trucks
• Crown Equipment
• Still
• Combilift
• Clark Material Handling
• Kalmar
• Manitou
• Hangcha
• HELI
• EP Equipment
• Hyundai Material Handling
• Doosan Industrial Vehicles
• UniCarriers
• Nissan Forklifts
• Cesab
• Aisle-Master
• Hubtex
• Toyota Material Handling
• Linde Material Handling
• Jungheinrich
• Hyster
• Yale
• Crown Equipment
• Mitsubishi Forklifts
• Clark
• Hangcha
• HELI
• EP Equipment
• Hyundai
• Doosan
• Nissan Forklifts
• UniCarriers

The DAP-BSB-Wired and DAP-OSB-Wired are aftermarket industrial seat belts and should not be described as genuine OEM components unless compatibility and OEM status have specifically been established.

Wired Seat Belts for Construction Plant Equipment

The Davis Access Parts Industrial Wired Seat Belts can also be considered for construction plant equipment where the machine requires a compatible wired operator-restraint system.

Potential applications may include:

• Telehandlers
• Excavators
• Mini excavators
• Dumpers
• Rollers
• Wheel loaders
• Skid-steer loaders
• Backhoe loaders
• Agricultural machinery
• Specialist construction equipment

Construction plant regularly operates on uneven terrain and in demanding environments, making the operator restraint an important part of the overall machine and seating system.

Where the machine incorporates electrical seat-belt monitoring, the integrated wired buckle contact provides an important additional function.

Plant Machinery Seat Belt with Switch

For businesses searching for a Plant Machinery Seat Belt with Switch, the DAP-BSB-Wired and DAP-OSB-Wired provide a practical industrial solution.

Potential plant manufacturers may include:

• JCB
• Caterpillar
• Komatsu
• Volvo Construction Equipment
• Hitachi
• Kubota
• Bobcat
• Takeuchi
• Hyundai Construction Equipment
• Develon
• Case Construction
• New Holland
• Manitou
• Wacker Neuson
• Yanmar
• SANY
• LiuGong

Compatibility depends on the individual machine’s seat design, mounting arrangement, electrical system and buckle-switch requirements.

Always check these requirements before ordering.

Wired Seat Belt for Telehandlers

Telehandlers combine the characteristics of material handling equipment and construction plant, making them another important application for industrial operator restraints.

A replacement Telehandler Seat Belt may be required during:

• Routine servicing
• Seat replacement
• Fleet refurbishment
• Damage repair
• Machine overhaul
• Pre-sale preparation
• Hire-fleet maintenance

Where a telehandler uses an electrical buckle-monitoring system, the Industrial Wired Black / Orange Seat Belts may provide a suitable replacement option, subject to compatibility.

Ideal for Forklift & Plant Hire Fleets

Forklift and plant-hire equipment can experience intensive use with numerous operators using the same machine.

Seat belts should therefore form part of regular inspection and maintenance procedures.

The Davis Access Parts Wired Industrial Seat Belts may be particularly useful for:

• Forklift hire companies
• Material handling dealers
• Plant-hire businesses
• Telehandler fleets
• Industrial fleet operators
• Equipment refurbishment companies
• Independent forklift engineers
• Plant engineers
• Fleet-maintenance workshops

Keeping appropriate replacement restraints available can help workshops address damaged belts, faulty retractors and defective buckle contacts efficiently.

Black or Orange Wired Seat Belt?

Both products share the same basic mechanical and electrical specification, so the main choice is webbing colour.

DAP-BSB-Wired Black Seat Belt

Choose black where you want:

• Traditional industrial appearance
• Discreet webbing
• OEM-style appearance
• Compatibility with dark industrial seating

DAP-OSB-Wired Orange Seat Belt

Choose orange where you want:

• High-visibility webbing
• Easier visual identification
• Distinctive fleet appearance
• Easier belt location for operators

For fleets where visual identification of the restraint is important, the orange version may be particularly attractive.

Benefits of Davis Access Parts Wired Forklift Seat Belts

The DAP-BSB-Wired and DAP-OSB-Wired offer a combination of mechanical restraint and electrical buckle monitoring capability.

Key features include:

• Designed for industrial equipment
• Suitable for forklift applications
• Suitable for fork trucks
• Suitable for material handling equipment
• Suitable for telehandlers
• Suitable for construction plant
• Black or orange webbing
• ALR automatic locking retractor
• 47mm-wide webbing
• Push-release buckle
• Top-release buckle design
• Closed retractor housing
• Side-mounted retractor
• Seat-mounted buckle
• Change-over electrical contact
• Two electrical connections
• 320mm wiring
• No buckle tensioner
• Suitable for compatible monitoring and interlock systems

These features make the seat belts particularly suitable for fleet maintenance, refurbishment and replacement applications.

Why Choose Davis Access Parts?

Davis Access Parts supplies replacement components, safety products and consumables for forklifts, material handling equipment, access platforms and plant machinery.

Whether you operate a single fork truck or maintain a large fleet of material handling and construction equipment, our growing product range is designed to support everyday servicing, repairs and equipment-safety requirements.

Order Wired Forklift Seat Belts from Davis Access Parts

Replace worn, damaged or faulty operator restraints with an Industrial Wired Black / Orange Seat Belts from Davis Access Parts.

Choose the DAP-BSB-Wired Black Seat Belt for a conventional industrial appearance or the DAP-OSB-Wired Orange Seat Belt for increased webbing visibility.

Both versions feature an ALR automatic locking retractor, 47mm webbing, push-release buckle, side-mounted retractor and seat-mounted buckle, together with a change-over electrical buckle contact, two connections and 320mm of wiring.

Designed for applications including forklifts, fork trucks, material handling equipment, telehandlers and construction plant machinery, these wired industrial seat belts provide a practical replacement option for equipment requiring a compatible electrical buckle connection.

Contact Davis Access Parts for assistance with product compatibility or order online for UK delivery.

---

Explore More Safety Products from Davis Access Parts

Complete your forklift safety upgrade with our extensive range of industrial safety products and replacement parts.

You may also be interested in:

• Industrial Safety Alarms – Reversing alarms, white noise alarms, talking alarms and back-up alarms.
• LED Light Beacons – Amber, green, blue and magnetic warning beacons for forklifts and warehouse vehicles.
• LED Work Lamps – Flood beam, spot beam, red safety lines, blue safety lines and ARC safety lights.
• LED Strobe Lights – High-intensity flashing warning lights for forklifts and industrial equipment.
• Deutsch DT, DTM & DTP Connectors – Waterproof electrical connector kits for industrial machinery.
• Forklift Tail Lights – LED rear combination lamps for improved visibility and safer operation.
• Safety Harnesses – Harnesses and lanyards suitable for powered access equipment.
• Safety Consumables – Anti-slip tape and essential workplace safety products.